Autodesk Certification Exam

CADPRO Systems is the Preferred Partner for Autodesk Certification Exam in New Zealand

Make sure your skills are recognised.

What is Autodesk Professional Certification?

Professional Certification allows experienced professionals with careers involving 2D and 3D design skills to certify their knowledge and experience with Autodesk applications and put themselves in line for career advancement. Focusing on advanced skills, Autodesk® Professional Certification is tier 2 in Autodesk’s three-tier certification spectrum, as shown below.

Autodesk Certified
User (ACU)

Autodesk Certified User demonstrates competency in entry-level skills.

What ACU exams are available?

  • Autodesk AutoCAD
  • Autodesk Inventor
  • Autodesk Fusion 360
  • Autodesk Revit Architecture
  • Autodesk Maya
  • Autodesk 3Ds Max

Autodesk Certified Professional (ACP)

Autodesk Certified Professional demonstrates advanced skills.

What ACP exams are available?

  • Autodesk AutoCAD
  • Autodesk AutoCAD Civil 3D
  • Autodesk Inventor
  • Autodesk Revit Architecture
  • Autodesk Revit Structure
  • Autodesk Maya
  • Autodesk 3Ds Max

Autodesk Certified
Specialist

Autodesk Certified Specialist demonstrates highly specialized Autodesk skills.

What Specialist exams are available?

This exam is by Autodesk invite ONLY.

Autodesk Certified
User (ACU)

Autodesk Certified User demonstrates competency in entry-level skills.

What ACU exams are available?

  • Autodesk AutoCAD
  • Autodesk Inventor
  • Autodesk Fusion 360
  • Autodesk Revit Architecture
  • Autodesk Maya
  • Autodesk 3Ds Max

Autodesk Certified Professional (ACP)

Autodesk Certified Professional demonstrates advanced skills.

What ACP exams are available?

  • Autodesk AutoCAD
  • Autodesk AutoCAD Civil 3D
  • Autodesk Inventor
  • Autodesk Revit Architecture
  • Autodesk Revit Structure
  • Autodesk Maya
  • Autodesk 3Ds Max

Autodesk Certified
Specialist

Autodesk Certified Specialist demonstrates highly specialized Autodesk skills.

What Specialist exams are available?

This exam is by invite only to high scored Autodesk Professional Certification Exam students.

What will receive when certified?

Your Autodesk Professional Certification will be a valuable asset in your career. It will be viewable online using your Certiport test candidate ID.
You can forward an electronic version to peers or employers or print a copy for their records.

Important notes:

  • The exam is based on a series of fundamental tasks that are not release specific. You will not need to order a specific release to match the software release in your lab.
  • The certification is valid for 3 years, before retaking the exam.

Why should I become an Autodesk Certified Professional?

  • Gain industry recognition for your skill set.
  • Demonstrate your expertise in the latest Autodesk technology.
  • Improve your performance and add value to your company.
  • Gain confidence and peer recognition
  • Earn a portable credential for job retention and mobility.
  • Become part of an elite team of professionals.
  • Benefit from easy exam preparation.

Making the best options for your Autodesk Certification Exam

Exam + Pre-test*
$249 +GST pp

Includes:

  • 1x Exam voucher – activated on the exam day at CADPRO Systems
  • 1x Pre-test – CADPRO Systems will provide the activation code and registration details via email. Pre-test can be accessed via web portal.

Exam + Re-take**
$199 +GST pp

Includes:

  • 1x Exam voucher – activated on the exam day at CADPRO Systems
  • Re-take exam – should you fail or not satisfied with your results then you can re-take the same exam. T&C’s apply **

Single Exam Voucher
$149 +GST pp

Includes:

  • 1x Exam voucher – activated on the exam day at CADPRO Systems

Discuss your options

Register your ineterest >

Our training coordinator will contact you to discuss the Autodesk Certification Exam based on your needs.

*Pre-test option only applies to the following products: AutoCAD, Revit Architecture, Inventor, 3ds Max, Maya.

*Test candidate exam policies (click here to read more)

Test candidates, proctors and administrators must adhere and/or enforce all of the following policies when taking or administering an exam at a Certiport Authorized Testing Center.

  • Upon arrival at the testing center, Test Candidates must present their personal identification bearing a photograph and signature.
  • Test candidates may not take recording devices such as paper/pencil, cameras, PDAs, computers, or communication devices such as cell phones, or pagers into the testing area.
  • Test candidates must not communicate with other test candidates either in the testing room, or in any other area of the testing facility during authorized testing breaks.
  • Test candidates must read and accept the terms of the non-disclosure agreement (NDA) presented prior to the start of the exam.
  • Test candidates must not remove exam content from the testing area, and must not reproduce exam content outside of the testing area.
  • Test candidates must abide by the terms of the retake policy.
  • Test candidates found to have violated testing center rules may lose any existing certifications and may be made permanently ineligible for additional certifications.

Please Note: In certain circumstances, the computer on which a test candidate is taking the exam may stop responding, or produce an error condition in which continuation of the exam would not be possible. If a test candidate experiences this or any other computer interruption, they must notify the Certiport Authorized Testing Center (CATC) administrator and/or proctor immediately to restart the exam. When the computer is restarted and/or the error condition resolved, the proctor will launch the software again and the test candidate will choose the “In-Progress” exam, which will return them to the point at which the interruption occurred. The software will retain the exam progress and time remaining up to the point of termination, as long as the exam is resumed on the same computer in which it was started.

For additional information regarding this policy, please email training@cadpro.co.nz

**Re-take policies (click here to read more)

  • If a candidate does not achieve a passing score on any Autodesk Certified Professional exam the first time, the candidate must wait one day (24 hours) before retaking the exam.
  • If a candidate does not achieve a passing score the second time, the candidate must wait five days (120 hours) before retaking the exam a third time.
  • A five-day waiting period will be imposed for each subsequent exam retake.
  • There is no annual limit on the number of attempts on the same exam.
  • If a candidate achieves a passing score on an ACP exam, the candidate may take it again.
  • This policy applies to both voucher-based and site-license-based Certiport Centers.
  • All original vouchers must be used prior to their expiration dates, without exception.
  • Retake vouchers must be used within 60 days of the initial failed exam. If a retake was purchased, the retake voucher is sent by email after a failed exam.
  • Test results found to be in violation of this retake policy will result in the candidate not being awarded the attempted credential, regardless of score.